Wharfedale Speaker 35T User Manual

P R O G R A M M E 3 5 & 3 5 T L O U D S P E A K E R  
PROGRAMME SERIES LOUDSPEAKERS  
USER MANUAL  
PROGRAMME 35, 35T  
WHARFEDALE SYSTEMS  
1. READ INSTRUCTIONS carefully before operating this product.  
5. CABLES - Never use shielded or microphone cable for any  
speaker connection as this will not be heavy enough to handle the  
amplifier load and could cause damage to the complete system.  
ƽ WARNING & SAFETY INSTRUCTIONS  
2.  
RETAIN these instructions.  
3. COMPLY WITH WARNINGS - All warnings and instructions for  
this product should be adhered to.  
6. ƽ ꢀ RIGGING • SUSPENDING • MOUNTING  
The rigging, suspension or mounting of this speaker system can  
expose members of the public to serious health risks and even  
death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG,  
SUSPEND OR OTHERWISE MOUNT THIS SYSTEM UNLESS  
YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY  
RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES.  
ALL RELEVANT SAFETY REGULATIONS MUST BE  
FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO  
NOT KNOW OF PERTINENT REGULATIONS, CONSULT  
QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.  
4. USE WITH AMPLIFIERS - In order to avoid damage, it is  
advisable to establish and follow a pattern for turning on and off  
any sound system. With all system parts connected, turn on  
source equipment, tape decks, instruments, mixers, signal  
processors etc., BEFORE turning on your power amplifier. Many  
products output turn on and turn off transients that can damage  
speakers. By turning on your power amplifier LAST and making  
sure the amplifier’s input controls are at minimum any transients  
“upstream” of the amplifier are not amplified and passed to the  
speaker. Wait until all system parts have stabilised, then bring up  
amplifier controls to operating level. This should take no more  
than a few seconds. Similarly when shutting systems down,  
always turn down amplifier input controls and then turn off your  
amplifier BEFORE shutting down other components. Professional  
amplifiers often feature delayed turn on/off circuits to perform  
these functions for you automatically.  
7. CAUTION: These professional loudspeaker systems are  
capable of generating very high sound pressure levels. Use care  
with placement and operation to avoid exposure to excessive  
levels that can cause permanent hearing damage.  
8. SERVICING - The user should not attempt to service this  
product except that mentioned in this manual.  
Wharfedale Pro Programme 35 & 35T Professional Sound Reinforcement Loudspeakers  
Proprietary designed, high efficiency, high power  
High power output, low distortion sound quality  
Wharfedale Professional drive units.  
100 volt ine system with switchable power tapping  
Sophisticated crossover design enables smooth  
power and frequency response control through  
crossover region.  
on 35T  
Vinyl black ash or rosewood finish. (Finish can be  
painted to match surroundings)  
Integral High Frequency Driver Overload protection  
Developed from award winning Diamond Series  
Small compact size  
“PRO-TECH”™  
Unpacking  
Wharfedale Pro Limited Warranty*  
All Wharfedale Pro products are fully checked before leaving the  
factory. After unpacking please inspect cabinets for any physical  
damage. Please retain the shipping carton if possible and internal  
packing material in case the unit needs to be  
returned. Please check as soon as possible  
the unit is functioning. In the event of any  
damage please contact your dealer  
Wharfedale Programme 35& 35T Series loudspeaker systems are  
warranted to be clear of manufacturing or materials defects for a period of  
one year from the original date of purchase. In the event of malfunction,  
contact your authorised Wharfedale Professional dealer or distributor for  
information.  
*Be aware that warranty details may differ from country to country. Contact your dealer or  
immediately so that a written claim for  
distributor for information.  
These terms do not infringe your statutory rights.  
damages can be made.  
Operating/Use  
1. The Programme 35 & 35T accept stripped bare end cables. The  
Programme 35 & 35T have a push and clip connector at the rear of  
each cabinet.  
Programme  
35 Rear  
2. Attach the speaker cable securely to your Programme Series unit  
and power amplifier (the amplifier should be off, power down mode).  
Try to use the correct type of speaker cable according to the handling  
ability of your Programme Series Cabinet. Use 2 core equal stranded  
insulated cable for speaker runs. It is always advisable to use heavier  
conductor cables on longer runs.  
3. Power up amplifier with levels on zero. Confirm units are operating.  
 

Wegener Communications Home Theater Server DTV742 User Manual
Wells Ventilation Hood WVF 886 User Manual
Whirlpool Ice Maker W10206421B User Manual
Whirlpool Washer CAM2762TQ0 User Manual
Whirlpool Washer Dryer LA77OOXP User Manual
Xerox Photo Printer C65 User Manual
Yamaha Electronic Keyboard LG 8 User Manual
Yamaha Stereo Receiver CRX 332 Black User Manual
Zanussi Microwave Oven MW530D User Manual
Zanussi Refrigerator ZBT6234 User Manual