D2485
Hot Melt
Glue Gun – Large
Manufactured in China
for Woodstock International, Inc.
SHOP FOX® IS A REGISTERED TRADEMARK OF
1-800-840-8420
FAX: 360-671-3053
Visit our website @ woodstockinternational.com
HOW TO USE THE GLUE GUN:
1: Plug in gun. Load the glue sticks into the back of the gun.
2: Press trigger several times until the glue stick is firmly set into the inner tube.
3: Allow the glue gun to warm up for approximately 5 minutes.
4: Squeeze trigger until glue flows from the nozzle.
5: Glue need not be spread. Press surfaces together within 15 seconds. Use of clamps or other holding devices is not necessary. Clean surfaces for best bonding.
6: Unplug glue gun when finished. No clean up required. Never pull the glue stick out the back of the gun.
Use 7⁄16" glue sticks only.
CAUTION:
Hot melt glue gets hot! Nozzle area temperature reaches 380°. If accidental contact should occur, do not try to remove the glue. Put in cold water immediately.
|
Whirlpool Clothes Dryer YWED5700SW0 User Manual
Whirlpool Ventilation Hood 9763375 User Manual
Whynter Building Set KS 1100 User Manual
Whynter Refrigerator WC 321DD User Manual
Windsor Vacuum Cleaner SP1 User Manual
Wolfgang Puck Espresso Maker BECR0010 User Manual
Xingtel Xiamen Electronics Telephone XL 2031IDW User Manual
Yamaha Computer Drive CRW8824IX Series User Manual
Zanussi Clothes Dryer TD 101 A User Manual
ZETA Music Systems Musical Instrument Strados Violin User Manual